Sharp PN-C861H PN-C751H PN-C861H Operation Manual
Sharp PN-C861H Manual
 |
View all Sharp PN-C861H manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-C861H manual content summary:
- Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 1
PN-C861H PN-C751H LCD MONITOR OPERATION MANUAL - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 4
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 5
or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • (-) sides of the batteries according to the instructions in the compartment. • Do not mix old reaction control in nuclear facility, medical life support system, and missile launch control in a - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 6
INSTRUCTIONS or tap the monitor with hard objects. - Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft and Windows are either - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 7
grasp the screen or tray. This may cause product damage, failure, or injury. [PN-C861H] • Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 8
Contents IMPORTANT INFORMATION 3 DEAR SHARP CUSTOMER 4 SAFETY PRECAUTIONS 4 TIPS AND SAFETY INSTRUCTIONS 6 MOUNTING PRECAUTIONS 7 Supplied Components 9 System Requirements 9 Part Rights and Other Matters...........28 Mounting Precautions (For SHARP dealers and service engineers 29 E8 - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 9
CD-ROM (Utility Disk for Windows): 1 Setup Manual: 1 Touch pen: 2 Tray: 1 Tray mounting screws (M3x15): 5 USB cable: 1 C over SHARP logo: 1 Place this sticker onto the SHARP logo to cover the logo. Wireless Adapter: 1 * SHARP Corporation holds authorship rights to the Utility - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 10
(See page 16.) 29. AC input terminal (See page 14.) 30. Handles 31. Handles (PN-C861H) 32. Expansion slot (OPS) This section is used to connect optional hardware for function expansion. released. 33. Vents Caution • Consult your SHARP dealer for attachment/detachment of optional parts. E 10 - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 11
nRemote control unit 1 2 Part Names 1. Signal transmitter 2. Operation buttons (See page 18.) 11 E - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 12
/ disconnecting cables. Also, read the manual of the equipment to be connected. terminals may cause malfunctions and other problems. • Do not use any cable flash drive, follow the steps for removal. (See page 13.) Supported USB flash drives File System FAT32 Capacity Up to 32 GB (maximum - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 13
8. RS-232C input terminal • You can control the monitor from a computer by connecting a commercially available RS-232 straight cable between these terminals and the computer. The terminal on the monitor is a female-type connector. 9. Audio output terminal • The output sound varies depending on the - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 14
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. 2 AC input terminal Power cord (Supplied) 1 Main power - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 15
. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the batteries (R03 or LR03 ("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 16
Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power on/off Press the - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 17
Basic Operation About the home screen of APPLICATION mode This appears when the input mode is changed to APPLICATION. (3) (2) (2) (1) (1) Start File Explorer. Start E-board. Display the list of applications. Start File Explorer. Display the side menu. Start E-board. Start EShareServer. - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 18
Basic Operation Using the remote control unit 5. VOLUME +/- (Volume adjustment) Press + or - to adjust the volume. 6. INFORMATION 11 In video input mode (other than APPLICATION), use this to 1 12 display the input terminal and the signal. 13 7. FUNCTION Use this to display the Function - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 19
17. INPUT (Input mode selection) The menu is displayed. Press the or button to select the input mode, and press the ENTER button to enter. Input mode Video Audio APPLICATION HDMI 1 HDMI 2 HDMI 3 APPLICATION HDMI 1 input terminal HDMI 2 input terminal HDMI 3 input terminal APPLICATION HDMI 1 - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 20
Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. nHow to display the menu Display a video menu 1. Change to a - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 21
setting?). ← From monitor to computer (Current volume setting: 30). TIPS • Send Command field, Parameter field and Return code at the same time. When sending a command manually in 1 character units and it takes more than 2 seconds, the command function does not work. 21 E - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 22
Controlling the Monitor with a computer (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. When a command has not been executed E R R Return code (0DH, 0AH) TIPS • "ERR" is returned when - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 23
Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: Command field (See page 21.) W When the "Parameter" is set in the parameter field (see page 21), the command functions as described under "Control/ - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 24
Controlling the Monitor with a computer (RS-232C) Others INFORMATION ALL RESET BACKLIGHT OFF Function Model Serial no. Check the resolution Command Direction INF1 R SRNO R RSET W BOMD W R Parameter 0 0 1 PXCK R Reply Control/Response contents Value Value ALL RESET Turn backlight - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 25
C861H: 420 W, PN-C751H: 360 W. *5 When Power Save Mode is set to On. When Power Save Mode is set to Off, and no optional part is attached: 2.0 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 26
nDimensional Drawings Note that the values shown are approximate values. [PN-C861H] 78-1/4 [1988] Screw holes for mounting brackets 13-3/4 use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M8 screws and tighten the screws. Note that screw hole - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 27
Specifications nChannels that can be used in wireless LAN Standard IEEE802.11 b/g/n IEEE802.11 ac/a/n Channel 1-11ch 36/40/44/48ch Frequency band (center frequency) 2412-2462MHz 5180-5240MHz 52/56/60/64ch 100/104/108/112/116/132/136/140ch 149/153/157/161/165ch 5260-5320MHz 5500-5700MHz 5745- - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 28
the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website: https://jp.sharp/business/lcd-display/support/download/source_e.html We are unable to answer any questions about the source code for the open source software. The source - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 29
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the cause product damage, failure, or injury. below. Do not grasp the screen or tray. [PN-C861H] [PN-C751H] • If you need to temporarily place the monitor on a table or other surface during - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 30
Mounting Precautions (For SHARP dealers and service engineers) nAttaching the Tray Secure the tray using 5 tray mounting screws (M3x15) (supplied). E 30 - Sharp PN-C861H | PN-C751H | PN-C861H Operation Manual - Page 31
PN-C861H-C751H HM EN19G(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
PN-C861H
PN-C751H
LCD MONITOR
OPERATION MANUAL