Sharp PN-C861H PN-C751H PN-C861H Operation Manual - Page 25

Specifications nProduct Specifications Model LCD component Max. resolution (pixels) Max. colors Pixel pitch Brightness (typical) Contrast ratio (typical) Viewing angle Screen active area inch (mm) Computer input signal Sync signal Plug and play Input Video terminals Audio Serial (RS-232C) Output Audio terminals System CPU Memory Storage LAN terminal Wireless LAN USB Expansion slot Speaker output Touch Panel Detection method Computer connector Power requirement Operating temperature *2 *3 Operating humidity *3 Power consumption *4 (standby mode *5) Dimensions inch (mm) (excluding protrusions) Weight lbs. (kg) PN-C861H PN-C751H 86" Class 75" Class [85-9/16 inch (217.4 cm) diagonal] TFT LCD [74-1/2 inch (189.3 cm) diagonal] TFT LCD 3840 x 2160 Approx. 1.07 billion colors 0.4935 mm (H) × 0.4935 mm (V) 400 cd/m2 *1 0.4296 mm (H) × 0.4296 mm (V) 1200: 1 178° right/left/up/down (contrast ratio ≥ 10) 74-5/8 (W) x 41-15/16 (H) (1895.0 x 1066.0) 64-15/16 (W) x 36-9/16 (H) (1649.7 x 927.9) Analog RGB (0.7 Vp-p) [75 Ω] Horizontal/vertical separate (TTL: positive/negative) VESA DDC2B Mini D-sub 15 pin, 3 rows x 1 HDMI x 3 Mini AV in x 1 Mini YPbPr x 1 (Component) 3.5 mm mini stereo jack x 1 D-sub 9 pin x 1 3.5 mm mini stereo jack x 1 Digital audio output (optical) x 1 Arm Cortex - A53 processor (quad core) 1GB 8GB 10BASE-T/100 BASE-TX (Wake on LAN only) IEEE802.11ac/n/a/g/b compliant (When a wireless adapter is connected) 2.0 compliant (Type A) x 3 19 V, 4.74 A (power supplied when expanding the functions with an optional part) 10 W + 10 W Infrared blocking detection method USB (2.0 compliant) (Type B) x 2 AC 100 - 240 V, 5.9 A, 50/60 Hz AC 100 - 240 V, 5.2 A, 50/60 Hz 41°F to 95°F (5°C to 35°C) 20% to 80% (no condensation) 530 W (0.5 W) 460 W (0.5 W) Approx. 78-1/4 (W) x 4-7/16 (D) x 46-1/4 (H) Approx. 68-5/16 (W) x 4-1/8 (D) x (1988 x 113 x 1175) 40-13/16 (H) (1735 x 105 x 1036) Approx. 176.4 (80) Approx. 134.5 (61) *1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness. This is the brightness of the LCD panel, not the brightness of the product. *2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied. *4 When an option is installed in the expansion slot. When an option is not installed, PN-C861H: 420 W, PN-C751H: 360 W. *5 When Power Save Mode is set to On. When Power Save Mode is set to Off, and no optional part is attached: 2.0 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 25 E