Sharp PN-C861H PN-C751H PN-C861H Operation Manual - Page 29
Mounting Precautions, For SHARP dealers and service engineers
![]() |
View all Sharp PN-C861H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. • This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. • To attach a VESA-compliant mounting bracket, use M8 screws that are 3/8 inch (10 mm) to 1/2 inch (12 mm) longer than the thickness of the mounting bracket. 3/8 - 1/2 inch (10-12 mm) Screws (M8) Mounting bracket Monitor mounting • Do not use an impact driver. • When moving the monitor, be sure to hold the handles or the parts marked by This may cause product damage, failure, or injury. below. Do not grasp the screen or tray. [PN-C861H] [PN-C751H] • If you need to temporarily place the monitor on a table or other surface during installation, spread a thick soft cloth on the table to prevent damage to the screen and table. • Prior to repacking or removal, remove the tray. • After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. • Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation. 29 E
![](/manual_guide/products/sharp-pnc751h-pnc751h-pnc861h-operation-manual-d16202a/29.png)