Sharp PN-C861H PN-C751H PN-C861H Operation Manual - Page 9

Supplied Components If any component should be missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Cable clamp (affixing type): 3  Power cord: 1  Remote control unit battery: 2  CD-ROM (Utility Disk for Windows): 1  Setup Manual: 1  Touch pen: 2  Tray: 1  Tray mounting screws (M3x15): 5  USB cable: 1  C over SHARP logo: 1 Place this sticker onto the SHARP logo to cover the logo.  Wireless Adapter: 1 * SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. System Requirements Hardware Operating system Must have a USB 2.0 compliant port. CD-ROM drive required for software installation. Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version) macOS v10.13, v10.14 Google Chrome OS Version 74 or later Requirements when the software (Windows) supplied with this monitor is used. CPU Intel Core i5-6360U or faster Intel Core i7-6650U or faster recommended Video Output Must be capable of output at a Vsync of 60 Hz or higher Memory At least 4 GB Free space on hard drive At least 5 GB (free space separately required for data storage) To use the touch panel, connect the USB cable (supplied) to your computer. The touch panel operates with the standard driver of each operating system. On the Mac, operation is only possible in mouse mode. Install Pen Software from the supplied CD-ROM. When the Information Display Downloader is installed, you can check and download the most recent versions of the software programs and operation manuals. To install the software, see the manual for each. 9E