Sharp PN-Y556 SHARP Content Distributor Operation Manual - Page 9
Adding or editing a panel, Managing panels, Adding a panel, Check the connection status
![]() |
View all Sharp PN-Y556 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Adding or editing a panel n Adding a panel 1. Click . The add new panel screen appears. 2. Enter the information of the panel to be added. Panel name* Set a name that enables easy identification of the panel. IP Address Set the IP address of the panel. You can check the IP address of the panel in the "INFORMATION" screen. Location* You can set the location where the panel is installed and comments. * A maximum of 32 characters can be set for the panel name and location. Alphanumeric characters, spaces, and symbols can be used. The following symbols can be used in the panel name and location • Click "Advanced settings" to set "FTP (Username, Password)", "Telnet (Username, Password)". The default settings are shown below. Change to match the settings of the panel. FTP Username: admin FTP Password: admin Telnet Username: Not set Telnet Password: Not set 3. Click "OK". TIPS • A maximum of 20 panels can be registered. n Editing a panel 1. Select the panel you want to edit. 2. Click . The edit panel screen appears. 3. Change the items you want to edit. 4. Click "OK". Managing panels n Check the connection status 1. Select the panel you want to check. 2. Click . Check the network connection status of the registered panel. The result of check connection appears in the result of connection status area. OK The panel is connected normally. ERROR The connection was not confirmed due to a problem. 9E
![](/manual_guide/products/sharp-pny326-sharp-content-distributor-operation-manual-d9e83dc/9.png)