Sharp UX-A1000 UXA100 Operation Manual - Page 32

Setting the Reception Mode Setting the Reception Mode Your fax has three modes for receiving incoming faxes: FAX mode: Select this mode when you only want to receive faxes on your line. The fax machine will automatically answer all calls on four rings and receive incoming faxes. TEL mode: Select this mode when you want to receive both phone calls and faxes on the line connected to the fax machine. All calls, including faxes, must be answered by picking up the fax machine's handset or an extension phone connected to the same line. TAD mode: Select this mode when you go out and want the built-in answering system to answer all calls. Voice messages will be recorded, and fax messages will be received automatically ("TAD" stands for "Telephone Answering Device".) Setting the reception mode Make sure a document is not loaded in the document feeder, and then press RESOLUTION/ until the arrow in the display points to the desired mode. RECEPTION MODE RESOLUTION/ RECEPTION MODE 123 456 789 0 01 02 07 08 13 14 03 04 05 06 09 10 11 12 15 16/POLL 17/G1 18/G2 RESOLUTION/ RECEPTION MODE JAN-03 10:30 TEL FAX TAD JAN-03 10:30 JAN-03 10:30 TEL FAX TAD TEL FAX TAD Note: TAD mode cannot be selected unless a general outgoing message has been recorded as explained on page 33. For more information on receiving faxes in FAX and TEL modes, see Chapter 4, Receiving Faxes. For more information on using TAD mode, see Chapter 2, Using the Answering System. 30