Sharp UX-A1000 UXA100 Operation Manual - Page 68
Rapid Key Dialing
View all Sharp UX-A1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Sending a Fax by Automatic Dialing Rapid Key Dialing If the number you want to dial has been stored as a Speed Dial number from 01 to 18, you can dial it by pressing the corresponding Rapid Key. 1 Load the document(s). • If desired, press RESOLUTION/ to set RECEPTION MODE the resolution and/or contrast. READY TO SEND 2 Press the Rapid Key corresponding to the desired Speed Dial number. • The name of the receiving party will appear in the display. If no name was stored, the fax number will appear. (If the name or number is incorrect, press .) STOP • The document will be automatically transmitted once the connection is established. 01 Example: To dial Speed Dial number 01, press Rapid Key 01. • If the transmission is completed successfully, the machine will beep once. • If an error occurs, the machine will beep three times and print a Transaction Report to inform you of the problem (see page 102). Using a Rapid Key for a voice call To use a Rapid Key for a voice call, simply lift the handset and then press the Rapid Key. 66