Sharp UX-A1000 UXA100 Operation Manual - Page 36
Operating the Answering System
View all Sharp UX-A1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Operating the Answering System 4 START/ Press MEMORY and speak into the handset to record a message. • The outgoing message can be up to 60 seconds long. While recording, the display will show the time left to record. 5 When finished, replace the handset or press . STOP To listen to the outgoing message To listen to the outgoing message, follow Steps 1 and 2 of the above procedure and then press PLAY . Note that the general outgoing message cannot be erased. If you need to change it, simply repeat the recording procedure. Operating the Answering System Activating the answering system To turn on the answering system so that callers can leave messages, press RESOLUTION/ until the arrow in the display points to TAD. (TAD stands for RECEPTION MODE "Telephone Answering Device".) RESOLUTION/ RECEPTION MODE TEL FAX TAD ♦ It will not be possible to set the reception mode to TAD if an outgoing message has not been recorded. Note: In TAD mode, the machine will automatically switch to fax reception if it detects six seconds of silence after answering a call. For this reason, if a caller pauses for this length of time while leaving a message, they will be cut off. 34