Sharp VL-NZ50U Operation Manual - Page 22
Powering the, Camcorder from an AC, Outlet
UPC - 074000352957
View all Sharp VL-NZ50U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Preparation Preparation Powering the Camcorder from an AC Outlet You can also power the camcorder from a power outlet by using the supplied AC adapter. Caution: • The supplied AC adapter is specially designed for use with this camcorder, and should not be used as a power supply for other camcorders. 1 Make sure that the Power switch is set to OFF. 2 Plug the AC adapter into a power outlet (1), then insert the DC plug into the DC input jack (2). • The camcorder is supplied power. DC input jack Note: • When using the AC adapter to power the camcorder, the battery pack is not charged. Cautions: • BEFORE REMOVING THE DC PLUG, ALWAYS STOP RECORDING OR PLAYBACK AND TURN THE POWER OFF. Removing the DC plug while shooting or during playback may damage the tape by causing it to wrap around the video head drum. • Disconnect the camcorder from the AC adapter if you will not use the camcorder for a long period of time. To power outlet 3 Hold down the Lock button and set the Power switch to CAMERA or VCR. Lock button 9