Sharp XR-1XDM XR-1S , XR-1X Operation Manual - Page 22
Setting up the Projector
View all Sharp XR-1XDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting up the Projector Setting up the Projector Position the projector perpendicular to the screen with the projector's feet flat and level to achieve an optimal image. Note • For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room. Standard Setup (Front Projection) ■ Place the projector at the required distance from the screen according to the desired picture size. (See page 19.) Example of standard setup Side View Screen H Lens center L Projecting a Reversed Image Projection from behind the Screen ■ Place a translucent screen between the projector and the audience. ■ Reverse the image by setting "Rear" in the "PRJ Mode" menu. (See page 46.) Projection Using a Mirror ■ Place a mirror (normal flat type) in front of the lens. ■ When the translucent screen is placed between the mirror and audience, set to "Front" in the "PRJ Mode" menu. (See page 46.) ■ When the mirror is placed on the audience side, set to "Rear" in the "PRJ Mode" menu. (See page 46.) Audience Set to "Front" Translucent screen Mirror Set to "Rear" Translucent Audience screen Audience Mirror Info • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. 18