Sharp XR-1XDM XR-1S , XR-1X Operation Manual - Page 64
Troubleshooting
View all Sharp XR-1XDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Troubleshooting Problem Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to the projector. • Remote control battery has run out. No picture and no sound • External output has not been set when connecting notebook or projector does not computer. start. • The lamp unit cover is not installed correctly. • Cables incorrectly connected to the projector. • "Bright" is set to minimum position. Page 25 - 29 23, 24, 25 14, 15 23 56, 57 23, 24, 25 40 Sound is heard but no picture appears (or picture is dark). • Image adjustments are incorrectly set. (Video Input only) • Video input system is incorrectly set. Color is faded or poor. Picture is blurred; noise appears. • Adjust the focus. • The projection distance exceeds the focus range. (Computer Input only) • Perform "Fine Sync" Adjustments ("Clock" Adjustment) • Perform "Fine Sync" Adjustments ("Phase" Adjustment) • Noise may appear depending on the computer. • Cables incorrectly connected to the projector. • Volume is set to minimum. 40 51 27 19 51 51 - 23, 24, 25 29 Picture appears but no sound is heard. An unusual sound is • If the picture is normal, the sound is due to cabinet shrinkage - occasionally heard from caused by room temperature changes. This will not affect operation the cabinet. or performance. Maintenance indicator on • See "Maintenance Indicators". 54 the projector illuminates or blinks in red. 60