Singer XL-550 Futura Instruction Manual - Page 10

SET UP YOUR MACHINE Be sure to wipe off any surplus oil from needle plate area before using your machine the first time. Power line cord/FOOT CONTROL Connect the plug of the power line cord into the cord socket (1) and your wall outlet (2) as illustrated. Connect the foot control plug into the machine socket (3), when using sewing machine only. NOTE: In sewing mode, the machine can be operated either with or without the foot control (see page 30 - 31). Always disconnect the machine from power supply by removing the plug from the walloutlet. POWER/LIGHT SWITCH Your machine will not operate until the power/light switch is turned on. The same switch controls both the power and the light. When servicing the machine, or when changing needles or lights, etc., the machine must be disconnected from the power supply. Set power/light switch at "OFF" Mettez l'interrupteur moteur/ lumière sur "OFF". Poner el Interruptor de corriente/ luz de velocidad en "OFF" machine socket Connecteur de la machine Conector de la máquina 4 1 2 Pin Butée Pasador 3 Power line cord Cordon Cordón de la linea eléctrica Foot control Rhéostat XL-550-P04-1.Ceonptrsol por pedal Power/light switch "OFF" Interrupteur moteur/lumière "ARRÊT" Interruptor corriente/luz "OFF" Power/light switch "ON" Interrupteur moteur/lumière "MARCHE" Interruptor corriente/luz "ON" SPOOL PINS HORIZONTAL SPOOL PIN for normal thread spool Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread. VERTICAL SPOOL PIN for large thread spool Attach the spool pin. Place felt disc over it. Place a thread spool on the spool pin. Spool Bobine Carrete Felt disc Rondelle feutre Disco del pasador carrete Vertical spool pin Porte-bobine vertical Pasador de carrete vertical Thread retaining slit Fente de retenue de fil Ranura de retención de hilo Spool pin cap Chapeau de Bobine Tapa del pasador carrete Spool Bobine Carrete Spool pin Porte-bobine Pasador carrete 10