Singer XL-550 Futura Instruction Manual - Page 108
Performance Checklist
View all Singer XL-550 Futura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
PERFORMANCE CHECKLIST GENERAL PROBLEMS Machine does not sew. * Power switch is turned off.- Turn on the switch. (see page 10 - 11). * Buttonhole lever is not raised when sewing stitch patterns. - Raise buttonhole lever. (see page 52 - 55). * Buttonhole lever is not lowered when sewing buttonhole. - Lower buttonhole lever. (see page 52 - 55). Machine jams/knocks. * Thread is caught in hook. - Clean hook. (see page 110 - 111). * Needle is damaged. - Replace needle. (see page 21). Fabric does not move. * Presser foot is not lowered - Lower presser foot. (see page 106 - 107). * Stitch length is too short - Lengthen stitch length. (see page 24 - 27). * Feed dogs are lowered - Raise feed dogs. (see page 106 - 107). STITCHING PROBLEMS Machine skips stitches. * Needle is not all the way up into needle clamp. (see page 21). * Needle is bent or blunt. - Replace needle. (see page 21). * Machine is not threaded correctly. (see page 16 - 19). * Thread is caught in hook. - Clean hook. (see page 110 - 111). Stitches are irregular. * Needle size is not correct for thread and fabric. (see page 20). * Machine is not threaded correctly. - (see page 16 - 19). * Top thread tension is too loose. (see page 22 - 23). * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Bobbin has not been wound evenly. - Rewind bobbin. (see page 12 - 13). Needle breaks. * Fabric is being pulled or pushed against machine feeding action. - Guide it gently. * Needle size is not correct for thread and fabric. (see page 20). * Needle is not all the way up into the needle clamp. (see page 21). THREAD PROBLEMS Needle thread breaks. * Machine is not threaded correctly. (see page 16 - 19). * Top thread tension is too tight. (see page 22 - 23). * Needle is bent. - Replace needle. (see page 21). * Needle size is not correct for thread and fabric. (see page 20). Bobbin thread breaks. * Bobbin case is not threaded correctly. (see page 14 - 15). * Lint accumulates in bobbin case or hook. - Remove lint (see page 110 - 111). Fabric puckers. * Top thread tension is too tight. - Adjust thread tension. (see page 22 - 23). * Stitch length is too long for sheer or soft fabric. - Shorten stitch length. (see page 24 - 27). 108