Singer XL-550 Futura Instruction Manual - Page 88
Embroidering With Futura
View all Singer XL-550 Futura manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
HELPFUL INFORMATION FOR EMBROIDERING WITH FUTURA 1. If stitches are missing If the embroidery machine detects that the thread has broken, it may continue to embroider up to about eight stitches without any thread (blank stitches) before it automatically stops. In such cases, use the following procedure to step back through the embroidering data to the point for continuing. 1. Press the reverse switch (stitch return) to step back through the embroidery data. The hoop will move back one stitch at a time. Step back through the data until the blank area has been completely passed over. 2. Restart the embroidery machine and continue embroidering. Embroidering direction Direction de broderie Dirección de bordado Embroidered section Section brodée Sección bordada 1357 2468 automatically stop S'arrête automatiquement Para automáticamente Blank stitches resulting from thread breakage Points vides résultant d'une rupture du fil Puntadas en blanco resultantes de ruptura de hilo 2. Computer screen says thread is broken, machine lights are flashing lights and making a beeping sound, but thread is not broken. Upper thread is not in the thread tension. Rethread upper thread, (see 16 - 17 "Threading the Top Thread".) Placing the small net that is supplied with the accessories over the spool of thread may ensure that the thread is unwinding properly. Reverse stitch button Interrupteur couture arrière interruptor de puntadas hacia atrás 3. After resizing a design, the density of the stitching is either too tight or not tight enough. The FUTURA software will recalculate the stitch of an imported design when sizing, but only when using the DESIGN>CHANGE SIZE option. It does have a limitation of re-sizing up to 149% and down sizing to 51% and while still being able to re-calculate the stitches correctly. 88