Sony BDV-IZ1000W Operating Instructions - Page 18
Assembling the speakers, When installing the speakers on a wall
View all Sony BDV-IZ1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting Started Assembling the speakers For assembling the speakers, refer to "Speaker Installation Guide" (supplement). To connect speaker cords to the center speaker and subwoofer (BDVIZ1000W only) Speaker terminals are located on the rear of the speakers. Connector Colored tube (+) (-) Rear of the subwoofer Purple colored tube Rear of the center speaker Green colored tube When installing the speakers on a wall Caution • Contact a screw shop or installer regarding the wall material or screws to be used. • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the colored tube to 3, and the speaker cord without the colored tube to #. Colored tube Front left speaker (L): White Front right speaker (R): Red Center speaker: Green Surround left speaker (L): Blue Surround right speaker (R): Gray 18US