Sony BDV-IZ1000W Operating Instructions - Page 62
[Audio Settings
![]() |
View all Sony BDV-IZ1000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
x [YCbCr/RGB (HDMI)] [Auto]: Automatically detects the type of external device, and switches to the matching color setting. [YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals. [YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals. [RGB]: Select this when connecting to a device with an HDCP-compliant DVI jack. x [HDMI Deep Color Output] [Auto]: Normally select this. [12bit], [10bit]: Outputs 12bit/10bit video signals when the connected TV is compatible with Deep Color. [Off]: Select this when the picture is unstable or colors appear unnatural. x [Pause Mode] (BD/DVD VIDEO/DVD-R/ DVD-RW only) [Auto]: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. [Frame]: The picture, including subjects that do not move dynamically, is output in high resolution. [Audio Settings] x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Off]: Outputs the primary audio only. Select this when outputting HD audio signals to an AV receiver. x [Audio DRC] You can compress the dynamic range of the sound track. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). [Off]: No compression of dynamic range. [On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. x [Attenuate - AUDIO] Distortion may occur when you listen to a component connected to the AUDIO (AUDIO IN L/R) jacks. You can prevent distortion by reducing the input level on the unit. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. x [Audio Output] The system cannot output multi-channel sound from both the HDMI (OUT) jack and system's speakers simultaneously. [Speaker]: Outputs multi-channel sound from the system's speakers only. [Speaker + HDMI]: Outputs multi-channel sound from the system's speakers and 2-channel linear PCM signals from the HDMI (OUT) jack. [HDMI]: Outputs multi-channel sound from the HDMI (OUT) jack only. Sound format depends on the connected component. Note • Even if [HDMI] or [Speaker + HDMI] is selected, the sound of functions other than "BD/DVD," "D. MEDIA," "HDMI1," or "HDMI2" is output from the system's speakers, not from the HDMI (OUT) jack. • When you set [Audio Output] to [HDMI], the SOUND MODE, "TONE," "NIGHT MODE," and "SUR.SETTING" functions are disabled. • When the System Audio Control function (page 52) is activated, this setting may change automatically. x [Sound Effect] You can set the system's sound effects (SOUND MODE, "TONE," "NIGHT MODE," and "SUR.SETTING") to on/off. [On]: Enables all of the system's sound effects. The upper limit of sampling frequency is set to 48 kHz. [Off]: The sound effects are disabled. Select this when you do not want to set the upper limit of sampling frequency. 62US
![](/manual_guide/products/sony-bdviz1000w-operating-instructions-adec195/62.png)