Sony BRC300 Operating Instructions - Page 40

5 Storing the Camera Settings in Memory - Presetting Feature Up to sixteen combinations of settings (sixteen positions), including camera position, zooming, focusing, and backlighting, can be stored in the memory of the camera using the RM-BR300 Remote Control Unit. The number of positions that can be stored depends on the camera model. You can store up to six positions on a BRC-300/300P camera. For details of the camera settings to be preset, see "Presetting Items" on page 59. RESET While holding down the PRESET button, press any of the POSITION buttons, 1 to 8, in which you want to store the settings. Press a POSITION button. RESET 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 16 PRESET While holding down The settings are stored in the memory of the camera. The pressed button flashes during storing. Flashing stops when storing is completed. To recall the stored settings Select the function of the POSITION 1 to 8 buttons using the SHIFT button, if necessary. Press any of the POSITION buttons, 1 to 8, in which you have stored the settings. 5 1 PANEL LIGHT BLACK LIGHT PAN-TILT RESET ONE PUSH AWB MENU VALUE LOCK RESET - R BRIGHT + PRESET MODE POSITION SHIFT 1 9 STD 2 10 REV 3 11 4 12 5 13 6 14 7 15 8 16 - B + L/R DIRECTION To cancel the preset memory Select the function of the POSITION 1 to 8 buttons using the SHIFT button, if necessary. While holding down the RESET button, press the POSITION button from which you want to cancel the settings. CAMERA AUTO FOCUS AUTO MANUAL POWER 1 2 3 4 5 6 7 NEAR FAR ONE PUSH AF Operation Using the RM-BR300 Remote Control Unit 4 2 1 2 3 4 Press the PAN-TILT RESET button to reset the pan/ tilt position. Press the CAMERA button to select the camera whose settings you want to preset. Adjust the position, zooming, focusing and backlighting of the camera. (See page 36 to 39.) Press the SHIFT button to select the function of POSITION 1 to 8 buttons, if necessary. To store in positions 1 to 8, press the SHIFT button so that the upper indicator lights. The POSITION 1 to 8 buttons can be used for positions 1 to 8. To store in positions 9 to 16, press the SHIFT button so that the lower indicator lights. The POSITION 1 to 8 buttons can be used for positions 9 to 16. for positions 1 to 8 SHIFT While holding down RESET Press a POSITION button. 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 16 PRESET The pressed button flashes during canceling of the settings. Flashing stops when the settings have been canceled. Notes • When the power is turned on, the camera starts with the settings stored in POSITION 1. • If you want to retain the previous pan and tilt positions when the power is turned off and turned on again, store those positions in POSITION 1. • When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION. for positions 9 to 16 40 Storing the Camera Settings in Memory - Presetting Feature