Sony BRC300 Operating Instructions - Page 42
Sony BRC300 Manual
View all Sony BRC300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installation and Connections 3 Tighten the two screws on the interface card. Installation Attaching an Interface Card Attach an interface card (not supplied) to the card slot on the rear of the camera. 1 Loosen the two screws to remove the card slot cover. To remove the interface card Loosen the two screws on the interface card and pull the card out straight and slowly. Installing the Camera To install the camera on a desk Place the camera on a flat surface. If you have to place the camera on an inclined surface, make sure that the inclination is less than ±15 degrees, so that the pan/tilt performance is guaranteed, and take an appropriate countermeasure to prevent the camera from falling. Installation and Connections 2 Insert an optional interface card into the card slot. Align both ends of the interface card with the sliders inside the slot, then insert the card securely as far as it will go. Notes • Do not grasp the camera head when carrying the camera. • Do not turn the camera head by hand. Doing so will result in the camera malfunctioning. Interface card (not supplied) 42 Installation