Sony BRC300 Operating Instructions - Page 54
Sony BRC300 Manual
View all Sony BRC300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Appendix Error messages for the BRU-300/300P Optical Multiplex Unit Message Meaning/remedies Communication error The message will appear when the Please check Optical Multiplex Unit is turned on, if a connection problem occurs in the connection of the Optical Fiber Cable between the camera and the Optical Multiplex Unit. Turn off the power of the camera and the Optical Multiplex Unit, check the connection of the Optical Fiber Cable and turn the power on again. Option card error Please check option card The message will appear when sametype interface cards are inserted into the two card slots on the Optical Multiplex Unit. Turn off the power of the Optical Multiplex Unit and remove either of the cards. List of Messages The following messages may appear on the screen. Take the necessary measures shown below. Indicators on the BRC-300/300P camera Indicator STANDBY lamp flashes. Meaning/remedies The camera stopped moving due to an error in the pan/tilt mechanism. Reset the pan/tilt position or turn off the power of the camera and turn it on again. Turn off the power of the camera, and consult with your Sony dealer. The tally lamp flashes. Messages for the BRC-300/300P camera Message Meaning/remedies Please restart system You are prompted to restart the power of the camera after you changed the setting of "IMG-FLIP" in the SYSTEM menu or "D-ZOOM" in the PAN TILT ZOOM menu. Use the POWER switch on the supplied Remote Commander or the POWER button on the RM-BR300 Remote Control Unit to turn the power off, then on. The changed setting becomes effective. PRESET xx OK (xx = 1 to 6) When you store the camera settings into the memory (POSITION 1-6), the message will appear for 2 seconds. White balance active While the white balance adjustment is automatically adjusted, the message will blink. Wait for a while. When the adjustment is complete, it will disappear. White balance active The message will appear only when you Please wait activate the one-push white balance adjustment by pressing the ONE PUSH AWB button on the RM-BR300 Remote Control Unit. Appendix 54 List of Messages