Sony CCD-TR3000 Operation Manual - Page 16
Connect, Camcorder, Handycam, Station
View all Sony CCD-TR3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connections for Playback To Connect the Camcorder to the Handycam Station (1) Connect the power cord of the supplied AC power adaptor to a wall outlet. (2) Connect the supplied connecting cord to the DC OUT jack on the AC power adaptor. (3) Insert the connecting plate into the guides at the bottom of the Handycam Station. (4) Set the POWER switch of the camcorder to OFF. (5) Aligning the bottom of the camcorder with the arrow mark on the Handycam Station, slide the camcorder along the guide until it clicks. (6) Set the POWER switch of the camcorder to VTR. OCR u 00 (CAMERA) OFF (cAincii.i/GO°,=) You can charge the battery pack installed in the camcorder by connecting the AC power adaptor to th' Handycam Station and setting the HANDYCAM POWER switch to OFF. The CHARGE lamp lights u and goes out when charging is completed. Charging time of the supplied NP-520 battery pack is approx. 2 hours and 30 minutes. Caution Do not set the POWER switch to CAMERA. The Handycam Station can be used only for VTR mode. To remove the camcorder (1) Set the POWER switch of the camcorder to OFF. (2) Press RELEASE on the Handycam Station. (CAMERA) OFF QTR