Sony CCD-TR3000 Operation Manual - Page 6
Charging, Installing, Battery
View all Sony CCD-TR3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started 0- - Charging and Installing the Battery Pack Before using your camcorder, you first need to charge and install the battery pack. To charge the battery pack, use the supplied AC-V515 AC power adaptor. Charging the Battery Pack Charge the battery pack on a flat surface without vibration. (1) Connect the power cord to a wall outlet. (2) Align the surface of the battery pack indicated by the ► mark with the edge of the terminal shutter of the AC power adaptor. Then fit and slide the battery pack in the direction of the arrow. The CHARGE lamp (orange) lights up. Charging begins. When charging is completed, the CHARGE lamp goes out. Unplug the unit from the wall outlet, then remove the battery pack and install it into the camcorder. You can also use the battery pack before it is completely charged. Charging Time Battery pack Charging time* NP-520 (supplied) 110 NP-500H 100 NP-720 190 * Approximate minutes to charge an empty battery pack using the AC-V515. (Lower temperatures require a longer charging time.) To use the NP-720 battery pack, you have to use the NPA-Ll battery adaptor (not supplied) (p. 22). Battery Life Battery pack NP-520 (supplied) NP-500H Typical recording time** 35 30 Continuous recording time*** 70 60 ** Approximate minutes when recording while you repeat recording start/stop or zooming and turning the power on/off. The actual battery life may be shorter. *** Approximate continuous recording time indoors. To Remove the Battery Pack Slide the battery pack in the direction of the arrow. 6