Sony CCD-TR3000 Operation Manual - Page 28
Re-recording, Picture, Middle, Recorded
View all Sony CCD-TR3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Re-recording a Picture in the Middle oftt Recorded Tape You can insert a scene in the middle of a recorded tape by setting the starting and ending points. The previous recorded portion will be erased. If the RC time code appears in the viewfinder, set COUNTER to NORMAL in the menu system (p. 23) to display the tape counter. (1) While the camcorder is in standby mode, keep pressing the + (forward playback) or - (reverse playback) side of EDITSEARCH, and release the button where you want to end the insertion (b). The camcorder enters standby mode again. (2) Press COUNTER RESET. The counter resets to zero. (3) Keep pressing the - side of EDITSEARCH and release the button at the point where you want to start the insertion [a]. (4) Press ZERO MEM on the Remote Commander. The ZERO MEM indicator flashes. (5) Press START/STOP to start recording. The recording stops automatically at the counter zero point. [a] -4. -... ---44 '1 ----- --", 11 6----- ____•..... O.- + EDITSEARCH - g Clan ll h; \ 1 ,L. ---- -- .J., ..- [b] MM -g--' -- 3 + EDITSEARCH - 2 COUNTER RESET STBY 0:00:00 Ogg a 4 ZERO MEM STBY 2ZERO MEM( To Change the End Point Press ZERO MEM to erase the ZERO MEM indicator, then repeat steps 2 to 5. Note on re-recording The picture and the sound may be distorted at the end of the inserted portion when it is played back. 28