Sony CDPCX455 Primary User Manual - Page 32

Using the Player with Another Component 3 Press H to start playing. The MEGA CONTROL button lights up when a track in the second player is selected. To cancel No-Delay/X-Fade Play Press the corresponding button repeatedly until "NO DELAY" or "X-FADE" disappears from the display. The current player continues playing. z You can change the method (No-Delay or X-Fade) during play Press the corresponding button (NO DELAY or X-FADE) following the procedure in step 2. z You can start X-Fade at any point of the track Press FADER during X-Fade Play. Even after you have set the X-Fade mode and started X-Fade play, you can start X-Fade manually at any point you like. Note that you cannot do this operation while the sound from both players is mixed. Notes • Play starts from the second player if you start play while the MEGA CONTROL button is lit. • When one player has played all the discs or tracks in the player ahead of the other player, play stops. • Do not use the controls on the second player during No-Delay/X-Fade Play. They may not work correctly. Controlling the Player by Another Unit When you connect the player to a Sony MD deck compatible with the Mega Control function, or operate a Sony MD deck by using computer software such as "MD Editor," you must set the player as described below: MENU/NO YES JOG 1 Press MENU/NO. 2 Turn the JOG dial until "CONTROL A1 ?" appears in the display window. 3 Press YES. "CONTROL A1??" appears in the display. 4 Press YES. To return to normal setting After following steps 1 and 2, and "CONTROL A1II ?" is displayed, then press YES. Notes • You can perform the operation above correctly only when you operate Disc 1 to Disc 200. • You cannot operate this player correctly from another player that does not have the CONTROL A1II jack. In this case, operate the other player from this player. 32US