Sony DCR-HC85 Camera Operations Guide - Page 113
Troubleshooting
View all Sony DCR-HC85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting Troubleshooting If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem Overall operations persists, remove the power source and contact your Sony dealer. If "C:ss:ss" is displayed on the LCD screen or the viewfinder, the self-diagnosis display function is activated. See page 121 for details. Symptom Cause and/or Corrective Actions The power does not turn on. • The battery pack is discharged, running low, or not attached to the camcorder. cAttach a charged battery pack to the camcorder. (p. 14) cUse the AC Adaptor to connect to the wall outlet. (p. 17) The camcorder does not operate even when the power is set to on. cDisconnect the AC Adaptor from the wall outlet or remove the battery pack, then reconnect it after about 1 minute. If the functions still do not work, press the RESET button using a sharp-pointed object. (If you press the RESET button, all settings including the clock setting are reset, except Personal Menu items.) A clattering noise is heard when the camcorder is handled with the POWER switch set to OFF (CHG) or in the PLAY/EDIT mode. • This is because some lens functions on your camcorder use a linear mechanism. This is not a malfunction. The supplied Remote Commander does not function. cSet [REMOTE CTRL] on the (STANDARD SET) menu to [ON]. (p. 87) cInsert a battery into the battery holder with the + - polarities correctly matching the + - marks. If this still does not solve the problem, insert a new battery since the battery is dead. (p. 142) cRemove any obstructions between the Remote Commander and the remote sensor. The camcorder gets warm. • This is because the power has been turned on for a long time. This is not a malfunction. Troubleshooting Troubleshooting 113