Sony DCR-TRV740 Operating Instructions (primary manual) - Page 112

Changing the menu settings Icon/item * 9PIC PRINT Mode z RETURN SAME MULTI MARKED DATE/TIME z OFF DATE DAY&TIME REC MODE z SP LP AUDIO MODE z 12BIT 16BIT q REMAIN z AUTO ON Meaning To cancel prints of split screens To make prints of the same split screen (p. 176) To make prints of different split screens To make prints of images with print marks in recording order To make prints without the recording date and time To make prints with the recording date To make prints with the recording date and time (p. 176) To record in the SP (Standard Play) mode To increase the recording time to 1.5 times the SP mode To record in the 12-bit mode (two stereo sounds) To record in the 16-bit mode (one stereo sound with high quality) To display the remaining tape bar: • For about eight seconds after your camcorder is turned on and calculates the remaining amount of tape • For about eight seconds after a cassette is inserted and your camcorder calculates the remaining amount of tape • For about eight seconds after N is pressed in VCR mode • For about eight seconds after DISPLAY is pressed to display the screen indicators • For the period of tape rewinding, forwarding or picture search in VCR mode To always display the remaining tape bar POWER switch MEMORY MEMORY CAMERA VCR CAMERA VCR** CAMERA VCR Note on PRINT SET * 9PIC PRINT and DATE/TIME are displayed only when an external printer (optional) is connected to the intelligent accessory shoe. Notes on the LP mode • When you record a tape in the LP mode on your camcorder, we recommend playing back the tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound. •When you record in the LP mode, we recommend using a Sony cassette so that you can get the most out of your camcorder. • When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the playback picture may be distorted or the time code may not be written properly between scenes. Note on AUDIO MODE When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX. * Except DCR-TRV240 112 ** To dub a tape to another VCR You cannot select AUDIO MODE for tapes recorded in the Digital8 system. You, however, can select AUDIO MODE when you dub tapes recorded in the Hi8/standard 8 system to another VCR using the i.LINK cable.