Sony DCR-TRV740 Operating Instructions (primary manual) - Page 119
Selecting the still image quality mode, Using, Memory Stick, Introduction
View all Sony DCR-TRV740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
"Memory Stick" operations Using "Memory Stick"- Introduction Selecting the still image quality mode You can select the image quality mode in still image recording. The default setting is SUPER FINE (DCR-TRV740/TRV840), or FINE (DCR-TRV340). (1) Set the POWER switch to VCR or MEMORY. Make sure that the LOCK switch is set to the left (unlock) position. (2) Press MENU to display the menu settings. (3) Turn the SEL/PUSH EXEC dial to select STILL SET in , then press the dial. (4) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial. (5) Turn the SEL/PUSH EXEC dial to select the desired image quality, then press the dial. 1 V POWER 2 MENU E ERMAORY CAM M OFCFR(CHG) 3 MEMORY SET STILL SET BURST OFF QUALITY IMAGESIZE RETURN [MENU] : END 4 MEMORY SET STILL SET BURST QUALITY SUPER FINE IMAGESIZE FINE RETURN STANDARD REMAIN 40 [MENU] : END 5 MEMORY SET STILL SET BURST QUALITY STANDARD IMAGESIZE RETURN REMAIN 60 [MENU] : END Note In some cases, changing the image quality mode may not affect the image quality, depending on the type of images you are shooting. 119