Sony DCRHC38 Operating Guide - Page 52
Troubleshooting Continued, The Cassette Memory indicator or - power ac
UPC - 027242701809
View all Sony DCRHC38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Troubleshooting (Continued) The Cassette Memory indicator or title display does not appear while using a cassette with Cassette Memory. • This camcorder does not support Cassette Memory, so the indicator does not appear. The remaining tape indicator is not displayed. • Set [ REMAIN] to [ON] to always display the remaining tape indicator (p. 40). The cassette is noisier during rewinding or fast-forwarding. • When using the AC Adaptor, rewind/fast forward speed increases (compared with battery operation) and therefore increases noise. This is not a malfunction. Recording The tape does not start when you press REC START/STOP. • Slide the POWER switch repeatedly to turn on the CAMERA lamp (p. 19). • The tape has reached the end. Rewind it, or insert a new cassette. • Set the write-protect tab to REC or insert a new cassette (p. 58). • The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette (p. 61). You cannot record a smooth transition on a tape from the last recorded scene to the next. • Perform [END SCH] (p. 24). • Do not remove the cassette. (The picture will be recorded continuously without a break even when you turn the power off.) • Do not record pictures in SP mode and LP mode on the same tape. 52 • Avoid stopping then recording a movie in the LP mode. [END SCH] does not work. • Do not eject the cassette after recording (p. 24). • There is nothing recorded on the cassette. • There is a blank section between recorded sections of the tape. This is not a malfunction. The auto focus does not function. • Set [FOCUS] to [AUTO] (p. 28). • The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 28). [STEADYSHOT] does not function. • Set [STEADYSHOT] to [ON] (p. 37). The BACK LIGHT function does not function. • In the following settings, the BACK LIGHT function is canceled. - [MANUAL] of [EXPOSURE] - [SPOT METER] • The BACK LIGHT function does not work during Easy Handycam operation (p. 18). A vertical band appears when recording candlelight or electric light in the dark. • This occurs when the contrast between the subject and the background is too high. This is not a malfunction. A vertical band appears when recording a bright subject. • This phenomenon is called the smear effect. This is not a malfunction.