Sony DG510 Operating Instructions - Page 32
Playback, Selecting a component
UPC - 027242705685
View all Sony DG510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5 Press V/v repeatedly to select "T. TONE Y". The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Sub woofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see "Adjusting the level (LEVEL menu)" (page 39). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the display during adjustment. 7 Repeat steps 1 to 5 to select "T. TONE N". You can also press any input buttons. The test tone turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. Note The test tone does not work when ANALOG DIRECT is selected. Playback Selecting a component SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER 1 2CH A.F.D. MOVIE MUSIC AMP MENU 123 FM MODE 456 7 >10/ - CLEAR D.TUNING 89 D.SKIP MEMORY DVD MENU 0/10 ENTER DISPLAY TOOLS MUTING F TV VOL MASTER VOL G g f RETURN/EXIT MENU MUTING 3 1 Press the input button to select a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. 32GB