Sony DG510 Operating Instructions - Page 69
Additional Information, Video General, Supplied accessories
UPC - 027242705685
View all Sony DG510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
6)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: 1 Vp-p/75 ohms COMPONENT VIDEO: Y: 1 Vp-p/75 ohms PB/CB: 0.7 Vp-p/75 ohms PR/CR: 0.7 Vp-p/75 ohms 80 MHz HD Pass Through General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz CEL, CEK 230 V AC, 50/60 Hz AU 240 V AC, 50 Hz KR, TH6 220 - 230 V AC, 50/60 Hz E2 120/220/240 V AC, 50/60 Hz TW 110 V AC, 60 Hz SP 230 - 240 V AC, 50/60 Hz Power consumption Area code Power consumption U, CEL, CEK, AU, 220 W KR, E2 CA 300 VA TH6, SP 200 W TW 500 W Power consumption (during standby mode) 0.3 W Dimensions (w/h/d) (Approx.) 430.5 × 157.5 × 309 mm (16 7/8 × 6 2/8 × 12 1/8 inches) including projecting parts and controls Mass (Approx.) 7.7 kg (16 lb 16 oz) Supplied accessories FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) Remote commander RM-AAU013 (1) R6 (size-AA) batteries (2) Optimizer microphone (ECM-AC2 or ECM-AC2a) (1) For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice. Additional Information 69GB