Sony DG510 Operating Instructions - Page 68

FM tuner Minimum RMS Output Power 8 ohms, 20 Hz - 500

Page 68 highlights

Models of area code KR Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 85 W + 85 W1) 70 W + 70 W3) Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W1) 90 W + 90 W3) Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 130 W/ch1) 120 W/ch3) Models of area code TH6 Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 70 W + 70 W1) 60 W + 60 W3) Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 80 W + 80 W1) 70 W + 70 W3) Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 120 W/ch1) 100 W/ch3) 1)Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz CEL, CEK, KR, TH6, SP 230 V AC, 50 Hz E2, AU 240 V AC, 50 Hz TW 110 V AC, 60 Hz 2)Reference power output for front, center and surround speakers. Depending on the sound field settings and the source, there may be no sound output. 3)Measured under the following conditions: Area code Power requirements KR, TH6 220 V AC, 50 Hz Frequency response Analog 10 Hz - 70 kHz +0.5/-2 dB (with sound field and tone bypassed) Inputs Analog Sensitivity: 500 mV/ 50 kohms S/N4): 96 dB (A, 500 mV5)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Outputs (Analog) AUDIO OUT Voltage: 500 mV/10 kohms SUB WOOFER Voltage: 2 V/1 kohm Tone Gain levels ±6 dB, 1 dB step 4)INPUT SHORT (with sound field and tone bypassed). 5)Weighted network, input level. FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step U, CA 530 - 531 - 1,710 kHz6) 1,710 kHz6) CEL, CEK, AU, TW, - KR, TH6, SP 531 - 1,602 kHz E2 530 - 531 - 1,610 kHz6) 1,602 kHz6) Antenna Loop antenna Intermediate frequency 450 kHz 68GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

68
GB
Models of area code KR
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
85 W + 85 W
1)
70 W + 70 W
3)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
100 W + 100 W
1)
90 W + 90 W
3)
Surround Mode Output Power
2)
(8 ohms, 1 kHz,
THD 10%)
130 W/ch
1)
120 W/ch
3)
Models of area code TH6
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
70 W + 70 W
1)
60 W + 60 W
3)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
80 W + 80 W
1)
70 W + 70 W
3)
Surround Mode Output Power
2)
(8 ohms, 1 kHz,
THD 10%)
120 W/ch
1)
100 W/ch
3)
1)
Measured under the following conditions:
2)
Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
3)
Measured under the following conditions:
Frequency response
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog
Sensitivity: 500 mV/
50 kohms
S/N
4)
: 96 dB
(A, 500 mV
5)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT
Voltage: 500 mV/10
kohms
SUB WOOFER
Voltage: 2 V/1 kohm
Tone
Gain levels
±6 dB, 1 dB step
4)
INPUT SHORT (with sound field and tone
bypassed).
5)
Weighted network, input level.
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna
Loop antenna
Intermediate frequency
450 kHz
Area code
Power requirements
U, CA
120 V AC, 60 Hz
CEL, CEK, KR,
TH6, SP
230 V AC, 50 Hz
E2, AU
240 V AC, 50 Hz
TW
110 V AC, 60 Hz
Area code
Power requirements
KR, TH6
220 V AC, 50 Hz
Area code
Tuning scale
10 kHz step
9 kHz step
U, CA
530 –
1,710 kHz
6)
531 –
1,710 kHz
6)
CEL, CEK, AU, TW,
KR, TH6, SP
531 –
1,602 kHz
E2
530 –
1,610 kHz
6)
531 –
1,602 kHz
6)