Sony DSC-H3/B Cyber-shot® Handbook - Page 16
Lens hood/Adaptor ring, Attaching the lens hood, Attaching a conversion lens not, supplied - lens cap
View all Sony DSC-H3/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Identifying parts Lens hood/Adaptor ring A Lens hood B Adaptor ring Attaching the lens hood When you shoot in bright lighting conditions, such as outdoors, we recommend that you use the lens hood to reduce the image quality deterioration caused by unnecessary light. 1 Attach the adaptor ring while the power is off. • You can attach the lens cap with the lens hood attached. • When using the lens hood, be careful that the following: - The AF illuminator light may be blocked. - The flash light may be blocked, causing the shadow to appear when using the built-in flash. Storing the lens hood The lens hood can be attached in the reverse direction to store it with the camera when it is not in use. Position the lens hood as shown below and turn the lens hood clockwise until it clicks. 2 Position the lens hood as shown below and turn the lens hood clockwise until it clicks. Attaching a conversion lens (not supplied) When you want to do enhanced wide-angle shots or zoom-in shots on distant objects, attach a conversion lens. 1 Attach the adaptor ring. 2 Attach a conversion lens. • When shooting with the conversion lens, go through the settings of [Conversion Lens] (page 72). • Refer also to the operating instructions supplied with your conversion lens. 16