Sony DSX-S310BTX Operating Instructions - Page 33
Connecting, Connecting a cellular phone, Connecting an audio device
View all Sony DSX-S310BTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4 Set the Bluetooth device to connect to this unit. "Connection Complete" appears and connection is complete. " " or " " appears when the connection is made. * Passkey may be called "passcode," "PIN code," "PIN number" or "password," etc., depending on the device. If the device supports Bluetooth version 2.1, passkey input is not required. Notes • While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. • It may take time to search or connect. • Depending on the device, the confirmation display of the connection appears before inputting the passkey. • The time limit for inputting the passkey differs depending on the device. • This unit cannot be connected to a device that supports only HSP (Head Set Profile). Connecting If pairing has already been achieved, start operation from here. Connecting a cellular phone 1 Be sure that both this unit and the cellular phone are switched to Bluetooth signal on. 2 Connect to this unit using the cellular phone. " " appears when the connection is made. If you select the Bluetooth Phone source after the connection is made, the network name and the connected cellular phone name also appear in the display. Notes • Some cellular phones require permission to access their phonebook data during handsfree connection to this unit. Obtain permission via the cellular phone. • While streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. A connecting noise may be heard over playback sound. Tips • With Bluetooth signal on: when the ignition is switched to on, this unit reconnects automatically to the last-connected cellular phone. But automatic connection also depends on the cellular phone's specification. If this unit does not reconnect automatically, connect manually. • You can also select the Bluetooth Phone source by pressing and holding (BROWSE) on this unit for 2 or more seconds, or pressing (CALL) on the card remote commander. Connecting an audio device 1 Be sure that both this unit and the audio device are switched to Bluetooth signal on. 2 Connect to this unit using the audio device. " " appears when the connection is made. Connecting to the audio device lastconnected from this unit 1 Be sure that both this unit and the audio device are switched to Bluetooth signal on. 2 Press (SOURCE/OFF) repeatedly until "Bluetooth Audio" appears. 3 Press (PAUSE). " " flashes while the connection is being made. " " stays lit when the connection is made. Connecting to the cellular phone last-connected from this unit 1 Be sure that both this unit and the cellular phone are switched to Bluetooth signal on. 2 Press (SOURCE/OFF) repeatedly until "Bluetooth Phone" appears. 3 Press the multi-way encoder. " " flashes while the connection is being made. " " stays lit when the connection is made. 33