Sony DSX-S310BTX Operating Instructions - Page 37

Music streaming Listening to music from an audio device You can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 1 Connect this unit and the Bluetooth audio device (page 33). " " appears during connection. 2 Turn down the volume on this unit. 3 Press (SOURCE/OFF) repeatedly until "Bluetooth Audio" appears. 4 Operate the audio device to start playback. 5 Adjust the volume on this unit. Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 1 Start playback of the Bluetooth audio device at a moderate volume. 2 Set your usual listening volume on the unit. 3 Press the multi-way encoder. 4 Rotate the multi-way encoder until "Bluetooth Audio Level" appears, then press it. 5 Rotate the multi-way encoder to adjust the input level ("+ 18dB" - "0dB" - "- 8dB"). Operating an audio device with this unit You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.) To Play Pause Skip tracks Reverse/ Fastforward Repeat play Shuffle play Do this Press (PAUSE).*1 Press (PAUSE).*1 Push the multi-way encoder left/right [once for each track]. Push and hold the multi-way encoder left/right. Press (REP) on the card remote commander.*2 Press (SHUF) on the card remote commander.*2*3 Skip albums Push the multi-way encoder up/ down. *1 Depending on the device, it may be necessary to press twice. *2 Press repeatedly until the desired setting appears. *3 You can also shuffle play by pressing and holding (ZAP/SHUF) on this unit. Operations other than the above should be performed on the audio device. Notes • Depending on the audio device, its information, such as title, track number/time, playback status, etc., may not be displayed on this unit. The information is displayed during Bluetooth Audio playback only. • Even if the source is changed on this unit, playback of the audio device does not stop. Tip You can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music. Other settings Initializing Bluetooth Settings You can initialize all the Bluetooth-related settings from this unit. 1 Press and hold the multi-way encoder. The menu list appears. 2 Rotate the multi-way encoder to select "BT Initialize," then press it. The confirmation appears. 3 Rotate the multi-way encoder to select "Yes." "Initializing..." appears while initializing the Bluetooth settings. 4 Press (BACK). The display returns to normal reception/play mode. Note When disposing of this unit, phonebook data should be deleted with "BT Initialize." 37