Sony DSX-S310BTX Operating Instructions - Page 50

No sound is heard from the Bluetooth audio device. The audio device is paused. t Cancel pause of the audio device. The sound skips during playback of a Bluetooth audio device. • Reduce the distance between the unit and the Bluetooth audio device. • If the Bluetooth audio device is stored in a case which interrupts the signal, remove the audio device from the case while using. • Several Bluetooth devices or other devices which emit radio waves are used nearby. t Turn off the other devices. t Reduce the distance from the other devices. • The playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction. The connected Bluetooth audio device cannot be controlled. Check that the connected Bluetooth audio device supports AVRCP. Some functions do not work. Check that the connecting device supports the functions in question. The name of the other party does not appear when a call is received. • The other party is not stored in the phonebook. t Store in the phonebook (page 35). • The calling phone is not set to send the phone number. A call is answered unintentionally. • The connecting phone is set to start a call automatically. • "Auto Answer" of this unit is set to "Short" or "Long" (page 34). Pairing failed due to time out. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time. Bluetooth function cannot operate. Turn off the unit by pressing (SOURCE/OFF) for 2 seconds, then turn the unit on again. No sound is output from the car speakers during handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Pandora connection is not possible. Shut down Pandora on the mobile device, and then launch again. 50 Error displays/Messages Busy now... Please try later This unit is busy. t After waiting a moment, try again. Checking The unit is confirming the connection of a USB device. t Wait until confirming the connection is finished. Connection Failed Accessing the phonebook was terminated from the cellular phone. t Access the phonebook in the cellular phone again. Device Inside If you turn the ignition switch to the OFF position without removing the USB device or iPod, "Device Inside" will appear in the display. Empty • The call history is empty. • The phonebook is empty. Error • USB device was not automatically recognized. t Reconnect it again. • Phonebook content was changed while accessing the cellular phone. t Access the phonebook in the cellular phone again. Failure (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. Failure (Illuminates for about 1 second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. HF Device is not available A cellular phone is not connected. t Connect to a cellular phone. Hubs Not Supported USB hub is not supported on this unit. Invalid channel file A file in the music folder may have been edited without using "Content Transfer." t Perform "SensMe™ Setup" for the USB device or Walkman again. For details on "SensMe™ Setup", see page 22. Local Seek +/- The local seek mode is on during automatic tuning. NO Device USB is selected as source without a USB device connected. A USB device or a USB cable has been disconnected during playback. t Be sure to connect a USB device and USB cable. NO Music The USB device does not contain a music file. t Connect a USB device with a music file in it. NO Name An album/artist/track name is not written in the track.