Sony DVP-F41M Operating Instructions - Page 60

3 Press X/x to select one of the TVS (TV Virtual Surround) sounds. Refer to the explanations given for each item. • TVS DYNAMIC • TVS WIDE • TVS NIGHT • TVS STANDARD 4 Press ENTER. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV To reset the TVS setting In Step 3, select "OFF." To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. TVS DYNAMIC Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. The sound imaging effect is distinct and clearly reproduces each aural element of the audio track. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV TVS NIGHT The large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you do not want to disturb other people but still want to hear the dialog and enjoy the surround sound effects of "TVS WIDE." TVS STANDARD Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers and retain the sound quality. L R TVS WIDE Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. This gives the sound an expanded effect that fills the area surrounding the listener. 60 L: Left front speaker R: Right front speaker : Virtual speakers