Sony FWD-40LX2F Operating Instructions - Page 62

Picture Settings For Video Input Picture HDMI 1 Picture Mode : Vivid Picture Mode Reset Standard Picture : CMuasxtom Brightness : T40C Control Color : 60 Hue : 0 Color Temp. : Cool Sharpness : 18 Noise Reduction : On CineMotion : Auto True Color Control To highlight an option and to change settings, press F/f/G/g. Press to confirm the selection. The "Picture" settings include the following options: Sel: Set: Back: Exit: MENU Picture Mode "Vivid": Select for enhanced picture contrast and sharpness. "Standard": Select for standard picture settings. "Custom": Allows you to store preferred settings. "TC Control": The setting is common with "Vivid". In addition, you can use the "True Color Control" function (after-mentioned). Tips • To change from one "Picture Mode" option to another, you can also use PICTURE on the remote control instead. • You can alter the "Picture Mode" options for each input. Picture Mode Reset Resets all settings and adjustments to the default setting for the currently selected "Picture Mode" ("Vivid", "Standard", "Custom", "TC Control") (except for the options grayed out). Picture Adjust picture contrast. Brightness Adjust to brighten or darken the picture. Color Adjust to increase or decrease color intensity. Hue Color Temp. Sharpness Adjusts the color tones of the picture. Note "Hue" is not available when the input is video or S Video and the color system of video signal is not NTSC. "Cool": Select to give the white colors a blue tint. "Neutral": Select to give the white colors a neutral tint. "Warm": Select to give the white colors a red tint. Adjust to sharpen or soften the picture. Noise Reduction Select to reduce the noise level of connected equipment. Select from "On" or "Off". CineMotion Select "Auto" to optimize the screen display automatically detecting film content and applying a reverse 3-2 pull down or 2-2 pull down process. Moving picture will appear clearer and more natural looking. Select "Off" to disable the detection. 22 GB