Home » Sony Manuals » Flat Panel Televisions » Sony FWD-40LX2F » Manual Viewer

Sony FWD-40LX2F Operating Instructions - Page 63

True Color Control, Picture Mode, Picture Mode Reset, Picture, Brightness, Color Temp., For PC Input

UPC - 027242705166

Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

True Color Control You can adjust the details of hue and saturation for each of 4 colors : red, green, yellow, blue, and you can highlight specific colors in the image. Select the color which you want to adjust, and you can check and see which part of current image will be adjusted. Then you can adjust it using the matrix dialog. Notes • This option can be adjusted when "Picture Mode" is set to "TC Control". • In "PAP" mode, you cannot select this option. Even if you select this option in the single- picture screen, the setting of this option may not be applied in the "PAP" mode. Tip You can alter the "Picture" settings ("Picture", "Brightness", "Color", etc.) for each "Picture Mode". Notes • In the "PAP" mode, none of the options of the "Picture" settings can be selected. • If there is no signal currently being input, none of the options of the "Picture" setting can be selected. For PC Input Picture Picture Mode : Picture Mode Reset Picture : Brightness : Color : Hue : Color Temp. : Sharpness : Noise Reduction : CineMotion : True Color Control : HD15 RGB Vivid 50 40 Neutral When input is switched to a PC input source, the "Picture" settings specific to PC input are applied. The "Picture" settings for a PC include the following options: GB Sel: Set: Back: Exit: MENU Picture Mode "Vivid": Select for enhanced picture contrast and sharpness. "Standard": Select for standard picture settings. "Custom": Allows you to store preferred settings. "TC Control": The setting is common with "Vivid". In addition, you can use the "True Color Control" function (after-mentioned). Picture Mode Reset Resets all settings and adjustments to the default setting for the currently selected "Picture Mode" ("Vivid", "Standard", "Custom", "TC Control") (except for the options grayed out). Picture Adjust to increase or decrease picture contrast. Brightness Adjust to brighten or darken the picture. Color Temp. See "Color Temp." for video input (page 22). True Color Control See "True Color Control" for video input (page 23). Notes • "Color", "Hue", "Sharpness", "Noise Reduction" and "CineMotion" are not available for PC input. • In the "PAP" mode, none of the "Picture" settings options can be selected. • If there is no signal currently being input, none of the options of the "Picture" setting can be selected. 23 GB

Section	Page
JP	2
目次	3
警告	4
注意	5
電池についての安全上のご注意	7
本機の性能を保持するために	8
設置するときのご注意	10
各部の名称と働き	11
前面パネル	11
サイドパネル	12
オプションアダプター	14
後面パネル	15
リモコン	16
ボタンの機能	16
リモコンの特別ボタン	18
ワイド切換を使う	18
2画面設定を使う	19
ID MODEボタンを使う	20
ECOモード機能を使う	20
接続	21
スピーカーの接続	21
電源コードの接続	21
ケーブルを処理する	22
メニューの設定	24
メニュー一覧	24
画質メニュー	26
音質メニュー	28
画面調整メニュー	29
設定メニュー	33
その他の情報	36
故障かな？と思ったら	36
入力信号一覧表	38
仕様	39
索引	41
GB	42
Table of Contents	43
Introduction	44
Precautions	44
Recommendations on Installation	46
Location and Function of Parts and Controls	47
Front Panel	47
Side Panel	48
Optional Adaptors	50
Rear Panel	51
Remote Control	52
Button Description	52
Special Buttons on the Remote Control	54
Using the Wide Mode	54
Using the PAP Setting	55
Using the ID MODE button	56
Using the ECO Mode function	56
Connections	57
Connecting the Speakers	57
Connecting the AC Power Cord	57
Cable Management	58
Using the Settings	60
Overview of the Menus	60
Picture Settings	62
Sound Settings	64
Screen Settings	65
Setup Settings	69
Other Information	72
Troubleshooting	72
Input Signal Reference Chart	73
Specifications	74
Index	76
FR	78
Table des matières	79
Introduction	80
Précautions	80
Recommandations pour l’installation	82
Emplacement et fonction des pièces et commandes	83
Panneau avant	83
Panneau latéral	84
Adaptateurs en option	86
Panneau arrière	87
Télécommande	88
Description des touches	88
Touches spéciales de la télécommande	90
Utilisation du Mode cinéma	90
Utilisation du réglage PAP	91
Utilisation de la touche ID MODE	92
Utilisation de la fonction Mode ECO	92
Raccordements	93
Raccordement des enceintes	93
Raccordement de la prise d’alimentation secteur	93
Gestion des câbles	94
Utilisation des réglages	96
Description générale des menus	96
Réglages Image	98
Réglages Son	100
Réglages Écran	101
Réglages Réglage	106
Informations supplémentaires	109
Dépannage	109
Tableau de référence des signaux d’entrée	110
Spécifications	111
Index	113
DE	114
Inhalt	115
Einführung	116
Sicherheitsmaßnahmen	116
Empfehlungen zur Aufstellung	118
Lage und Funktion der Teile und Bedienelemente	119
Vorderseite	119
Seitlicher Anschlussbereich	120
Zusatzadapter	122
Rückseite	123
Fernbedienung	124
Beschreibung der Tasten	124
Sondertasten auf der Fernbedienung	126
Im Breitbildmodus	126
Beim Einstellen von PAP	127
Die Taste ID MODE	128
Die Funktion ECO-Modus	128
Anschlüsse	129
Anschließen der Lautsprecher	129
Anschließen des Netzkabels	129
Umgang mit den Kabeln	130
Arbeiten mit den Menüeinstellungen	132
Übersicht über die Menüs	132
Bildeinstellungen	134
Toneinstellungen	136
Bildschirmeinstellungen	137
Grundeinstellungen	141
Weitere Informationen	144
Störungsbehebung	144
Diagramm der Eingangssignale	145
Technische Daten	146
Index	148
ES	150
Índice	151
Introducción	152
Precauciones	152
Recomendaciones para la instalación	154
Ubicación y función de componentes y controles	155
Panel frontal	155
Panel lateral	156
Adaptadores opcionales	158
Panel posterior	159
Mando a distancia	160
Descripción de los botones	160
Botones especiales del mando a distancia	162
Utilización del modo ancho	162
Utilización del ajuste de PAP	163
Utilización del botón ID MODE	164
Utilización de la función Modo ECO	164
Conexiones	165
Conexión de los altavoces	165
Conexión del cable de alimentación de ca	165
Organización de los cables	166
Uso de los ajustes	168
Descripción general de los menús	168
Ajustes de Imagen	170
Ajustes de Sonido	172
Ajustes de Pantalla	173
Ajustes de Ajustes	178
Otra información	181
Solución de problemas	181
Tabla de referencia de señal de entrada	182
Especificaciones	183
Índice alfabético	185
IT	186
Indice	187
Introduzione	188
Precauzioni	188
Consigli relativi all’installazione	190
Posizione e funzione delle parti e dei comandi	191
Pannello anteriore	191
Pannello laterale	192
Adattatori opzionali	194
Pannello posteriore	195
Telecomando	196
Descrizione dei tasti	196
Tasti speciali del telecomando	198
Uso del Modo ampio	198
Uso dell’impostazione PAP	199
Uso del tasto ID MODE	200
Uso della funzione Modo ECO	200
Collegamenti	201
Collegamento dei diffusori	201
Collegamento del cavo di alimentazione CA	201
Sistemazione dei cavi	202
Uso delle impostazioni	204
Panoramica dei menu	204
Impostazioni del menu Immagine	206
Impostazioni del menu Audio	208
Impostazioni del menu Schermo	209
Impostazioni del menu Impostazione	214
Altre informazioni	217
Guida alla soluzione dei problemi	217
Tabella di riferimento dei segnali di ingresso	218
Caratteristiche tecniche	219
Indice	221
CS	222
目录	223
介绍	224
使用前须	224
关于安装的建议	226
部件和控制器的位置和功能	227
前面板	227
侧面板	228
选购的适配器	230
后面板	231
遥控器	232
按键说明	232
遥控器上的特殊键	234
使用Wide Mod	234
使用PAP设	235
使用ID MODE键	236
使用ECO Mode功能	236
连接	237
连接扬声器	237
连接交流电源线	237
电缆布置	238
使用设	239
菜单概述	239
Picture设定	241
Sound设定	243
Screen设定	244
Setup设定	248
其它信息	251
故障排除	251
输入信号参照表	252
规格	253

Match case Limit results 1 per page

Tip

You can alter the “Picture” settings (“Picture”, “Brightness”, “Color”, etc.) for each “Picture Mode”.

•

In the “

PAP

” mode, none of the options of the “Picture” settings can be selected.

•

If there is no signal currently being input, none of the options of the “Picture” setting can be selected.

For PC Input

•

“Color”, “Hue”, “Sharpness”, “Noise Reduction” and “CineMotion” are not available for PC input.

•

In the “PAP” mode, none of the “Picture” settings options can be selected.

•

If there is no signal currently being input, none of the options of the “Picture” setting can be selected.

True Color Control

You can adjust the details of hue and saturation for each of 4 colors : red, green,

yellow, blue, and you can highlight specific colors in the image.

Select the color which you want to adjust, and you can check and see which part of

current image will be adjusted. Then you can adjust it using the matrix dialog.

•

This option can be adjusted when “Picture Mode” is set to “TC Control”.

•

In “PAP” mode, you cannot select this option. Even if you select this option in the single-

picture screen, the setting of this option may not be applied in the “PAP” mode.

Notes

When input is switched to a PC input source, the

“Picture” settings specific to PC input are applied.

The “Picture” settings for a PC include the following

options:

Picture Mode

“Vivid”: Select for enhanced picture contrast and sharpness.

“Standard”: Select for standard picture settings.

“Custom”: Allows you to store preferred settings.

“TC Control”: The setting is common with “Vivid”. In addition, you can use the

“True Color Control” function (after-mentioned).

Picture Mode Reset

Resets all settings and adjustments to the default setting for the currently selected

“Picture Mode” (“Vivid”, “Standard”, “Custom”, “TC Control”) (except for the

options grayed out).

Picture

Adjust to increase or decrease picture contrast.

Brightness

Adjust to brighten or darken the picture.

Color Temp.

See “Color Temp.” for video input (page 22).

True Color Control

See “True Color Control” for video input (page 23).

Notes

Picture

HD15 RGB

Sel:

Exit:

Back:

Set:

Picture Mode :

Vivid

Picture Mode Reset

Picture :

Brightness :

Color :

Hue :

Color Temp. :

Neutral

Sharpness :

Noise Reduction :

CineMotion :

True Color Control :