Sony FWD-40LX2F Operating Instructions - Page 74

Specifications Video processing Panel system a-Si TFT Active Matrix LCD Panel Display resolution 1,366 dots (horizontal) × 768 lines (vertical) Sampling rate 13.5 MHz to 140 MHz Color system NTSC, PAL, SECAM, NTSC4.43, PAL60, PAL-M, PAL-N Input signal See page 33. FWD-40LX2F/40LX2X: Pixel pitch Picture size Panel size 0.648 (horizontal) × 0.648 (vertical) mm (1/32 × 1/32 inches) 885 (horizontal) × 498 (vertical) mm (34 7/8 × 19 5/8 inches) 40-inch (diagonal 1,016 mm) FWD-32LX2F/32LX2X: Pixel pitch Picture size Panel size 0.510 (horizontal) × 0.510 (vertical) mm (1/32 × 1/32 inches) 698 (horizontal) × 392 (vertical) mm (27 1/2 × 15 1/2 inches) 32-inch (diagonal 801 mm) Inputs and Outputs HD15 (RGB/COMPONENT IN) D-sub 15-pin (female) (× 1) (See page 35.) AUDIO (COMMON AUDIO IN) HDMI 1/HDMI 2 IN Stereo mini jack (× 1) 500 mVrms, high impedance HDMI (compliant with HDMI specifications 1.1) VIDEO INPUT Adaptor BKM-FW10 VIDEO IN VIDEO OUT S VIDEO IN S VIDEO OUT AUDIO IN BNC (× 1) Composite video, 1 Vp-p ± 2 dB sync negative, 75 ohms (automatic termination) BNC (× 1) Loop-through Mini DIN 4-pin (× 1) Y (luminance): 1 Vp-p ± 2 dB sync negative, 75 ohms terminated C (chrominance): Burst 0.286 Vp-p ± 2 dB (NTSC), 75 ohms terminated Burst 0.3 Vp-p ± 2 dB (PAL), 75 ohms terminated Mini DIN 4-pin (× 1) Loop-through Pin jack (× 2) 500 mVrms, high impedance MONITOR CONTROL Adaptor BKM-FW20 REMOTE (RS-232C) D-sub 9-pin (× 1) CONTROL S IN/OUT Mini jack (× 2) General Power requirements 100 V to 240 V AC, 50/60 Hz, FWD-40LX2F/40LX2X: 2.3 A FWD-32LX2F/32LX2X: 1.3 A Power consumption FWD-40LX2F/40LX2X: 200 W FWD-32LX2F/32LX2X: 120 W Speaker output 7 W + 7 W (6 ohms) Adequate load impedance, 6 to 16 ohms Operating conditions Temperature: 0 °C to 35 °C (32 °F to 95 °F) Humidity: 20% to 90% (no condensation) Storing/transporting conditions Temperature: -10 °C to +40 °C (14 °F to 104 °F) Humidity: 20% to 90% (no condensation) 34 GB