Sony GDM-500PS Operating Instructions - Page 16

Customizing Your Monitor Setting the power saving delay time You can set the delay time before the monitor enters the power saving mode. See page 19 for more information on this monitor's power saving capabilities. 1 Press the MENU button. The MENU OSD appears. MENU 2 Press the ¨./> and >?// buttons to select " OPTION," and press the MENU button again. The OPTION OSD appears. OPTION ON ZZ... 1 MIN UNLOCK MANUAL DEGAUSS 3 Press the ¨./> buttons to select " ZZ... (PWR SAVE DELAY)." OPTION AUTO 5 SEC 1 MIN ZZ... 60 MIN OFF PWR SAVE DELAY 4 Press the >?// buttons to select the desired time. Locking the controls The control lock function disables all of the buttons on the front panel except the u (power) switch and MENU button. 1 Press the MENU button. The MENU OSD appears. MENU 2 Press the ¨./> and >?// buttons to select " OPTION," and press the MENU button again. The OPTION OSD appears. OPTION ON ZZ... 1 MIN UNLOCK MANUAL DEGAUSS 3 Press the ¨./> buttons to select " LOCK)." (CONTROL OPTION AUTO ZZ... UNLOCK LOCK CONTROL LOCK 4 Press the >?// buttons to select "LOCK." When PWR SAVE DELAY is set to "OFF," the monitor does not go into power saving mode. The OPTION OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To reset, press the RESET button while the OSD is on. The OPTION OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. Once you select "LOCK," you cannot select any items except "EXIT" and " OPTION" in the MENU OSD. If you press any button other than the u (power) switch and MENU button, the mark appears on the screen. To cancel the control lock Repeat steps 1 through 3 above and press the >?// buttons to select "UNLOCK." 16