Sony GDM-500PS Operating Instructions - Page 8
Selecting the Input Signal
UPC - 027242530331
View all Sony GDM-500PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Selecting the Input Signal This monitor has two signal input connectors (HD15 and 5BNC) and can be connected to two computers. When the power of both computers is on, select the input signal you want to view as follows. 1 Turn on the monitor and both computers. 2 Press the INPUT button to select the HD15 or 5BNC input signal. Each time you press the INPUT button, the input signal and corresponding indicator alternate. HD15 BNC INPUT Selecting the INPUT signal mode This monitor has two modes of input signal selection, "AUTO" and "MANUAL." When "AUTO" is selected If no signal is input from the selected connector, the monitor automatically selects the other connector's signal. When you restart the computer you want to view, or that computer is in power saving mode, the monitor may automatically select the other connector's signal. This is because the monitor switches from the interrupted signal to the constant signal. If this happens, manually select the desired signal using the INPUT button. When "MANUAL" is selected Even if no signal is input from the selected connector, the monitor does not select the other connector's signal. 1 Press the MENU button. The MENU OSD appears. MENU OK MENU MENU COLOR CENTER SCREEN GEOM EXIT ZOOM LANG SIZE OPTION 2 Press the ¨./> and >?// buttons to select " OPTION," and press the MENU button again. The OPTION OSD appears. OPTION ON ZZ... 1 MIN UNLOCK MANUAL DEGAUSS 3 Press the ¨./> buttons to select " (INPUT)." OPTION AUTO MANUAL ZZ... 1 MIN UNLOCK INPUT 4 Press the >?// buttons to select "AUTO" or "MANUAL." The OPTION OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. For more information on using the OSD, see "Introducing the On-screen Display System" on page 9. 8