Sony HAR-D1000 Primary User Manual - Page 11

Programming the CD tracks You can specify the playback order of the tracks on a CD and create your own programs containing up to 25 tracks. When using the remote, set SELECT to CD. 1 While the recorder is stopped, press PLAY MODE on the remote repeatedly until "PROGRAM" appears in the display. 2 Press CD l/L repeatedly until the desired track appears and press PLAY MODE on the remote to program the track. The last programmed track number appears, followed by the total playing time of the program. Tip You can select the track using the numeric buttons on the remote. To select a track numbered over 10, use >10 (see page 10). 3 To program additional tracks, repeat step 2. 4 Press CD H to start Program Play. To cancel Program Play While the recorder is stopped, press PLAY MODE on the remote repeatedly until "PROGRAM" disappears. Tip The program remains even after the Program Play ends. When you press the CD H button, you can play the same program again. Notes • The total playing time of the program does not appear when it exceeds 100 minutes. • "Step Full!" appears when you program over 25 tracks. Erase the unnecessary tracks to enter other tracks. • The program is erased when you disconnect the power cord. Changing the track order You can change your program while the recorder is stopped. To Erase the last track in the program Add tracks to the end of the program You need to Press CLEAR on the remote. Each time you press the button, the last programmed track is cleared. Follow step 2 of the programming procedure. Playing CDs 11