Sony HAR-D1000 Primary User Manual - Page 17
Adjusting the recording level, 1.8dB
View all Sony HAR-D1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3 Turn ALBUM dial (or press ALBUM +/- on the remote repeatedly) until "S.Space On" (or "S.Space Off") appears in the display, then press ALBUM dial or YES. 4 Turn ALBUM dial (or press ALBUM +/- on the remote) to select the setting, then press ALBUM dial or YES. To Turn on the Smart Space and Auto Cut functions Select S.Space On. (factory setting) Turn off the Smart Space and Auto Cut functions S.Space Off. 5 Press MENU/NO. Notes • When you record from a CD, Smart Space does not affect the order of the track numbers being recorded, even if the blank space occurs in the middle of a track. • Auto Cut is automatically turned on or off in tandem with Smart Space. • If the recorder continues recording pause for about 10 minutes after Auto Cut activated, recording stops automatically. • If this function is activated when the 400th track is reached, recording stop. Adjusting the recording level You can adjust the recording level for both analog and digital recordings. 1 Do steps 1 through 4 of "Recording to the HDD" on page 13. 2 Play the portion of the sound source with the strongest output. 3 Press MENU/NO. "Setup?" appears in the display. 4 Press ALBUM dial or YES. "Setup Menu" appears in the display. 5 Turn ALBUM dial (or press ALBUM +/- on the remote repeatedly) until "CD X.XdB" (or "Opt X.XdB" or "Anlg X.XdB") appears in the display, then press ALBUM dial or YES. 6 While monitoring the sound, turn ALBUM dial (or press ALBUM +/- on the remote repeatedly) to adjust the recording level so that the OVER indicator on the peak level meters does not turn on. Avoid turning on this indicator CD +1.8dB 7 Press ALBUM dial or YES. 8 Press MENU/NO. 9 Stop playing the sound source. 10 Do steps 6 and 7 of "Recording to the HDD" on page 13. Tips • You can adjust the recording level by pressing the REC LEVEL +/- buttons on the remote repeatedly during recording or recording pause. • To restore the factory setting, press CLEAR while adjusting the recording level in step 6. Notes • The recording level can only be increased up to +12 dB (for analog recording) or +18 dB (for digital recording) (0.0 dB is the factory setting). Therefore, if the output level of the connected components is low, it may not be possible to set the recording level to maximum. • The monitor sound is not affected when you adjust the recording level during recording. Recording to HDD 17