Sony HDR-AS50R Help Guide - Page 61
HDMI settings FDR-X3000/HDR-AS300
View all Sony HDR-AS50R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Note The remote commander & IR receiver kit RMT-VP1K and RMT-845 (sold separately) are required to use this function. Purchase a RMT-845 at a Sony service center. You can operate only the following settings using the RMT-845 (sold separately). Other settings are inoperable. Initialize the time code. When initializing the setting, the REC lamp blinks in blue for about 5 seconds. Start/stop recording. [58] Changing the Settings Camera settings HDMI settings (FDR-X3000/HDR-AS300) Set the HDMI output signal. 1 Press the MENU button. 2 Press the UP button or DOWN button to select (Camera Settings) - (HDMI settings) - setting item, then press the REC/ENTER button. The set items and details are as follows. : Sets the output resolution of the HDMI signal. : Sets the HDMI resolution signal automatically. (FDR-X3000): Sets the HDMI resolution signal to 2160p. : Sets the HDMI resolution signal to 1080p. : Sets the HDMI resolution signal to 1080i. : Sets the HDMI resolution signal to 720p. : Sets the output HDMI signal frame rate. : Output HDMI signal is 60p. : Output HDMI signal is 24p. * Available only when in movie mode (not available when playback). * This setting is disabled when image quality setting is set to a setting other than 1080 24p. * This setting is disabled when the HDMI resolution is set to a setting other than 1080. : Sends the time code or the user bit information to a device connected with HDMI (FDR- X3000). : Sends the time code or user bit information. : Does not send the time code or user bit information.