Sony HDR-AS50R Help Guide - Page 63
Press the MENU button., Press the UP button or DOWN button to select, Camera Settings, Beep -
View all Sony HDR-AS50R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Note If you change the USB power supply setting while the micro USB cable is connected, disconnect the cable, then reconnect. If you turn on the camera while charging the battery pack, charging stops and power is supplied to the camera from the device connected via USB. You can shoot and play back images using a USB power supply. However, the battery pack is not charged simultaneously. When using the camera with an external power supply, check that the icon ( power is being supplied is displayed on the screen. ) indicating that USB While USB power is being supplied, the continuous movie shooting time may be shortened due to the camera heating up. Even if the AC adaptor is connected to the camera, the battery will not be charged if the camera is turned on. Do not remove the battery while the access lamp is lit. The data in the memory card might be corrupted. FDR-X3000/HDR-AS300 To shoot/play back while receiving external power, insert the charged battery into the camera. Do not remove the battery from the camera when using the camera while receiving external power. [60] Changing the Settings Camera settings Beep You can set the audible notification of operations ON/OFF. 1 Press the MENU button. 2 Press the UP button or DOWN button to select (Camera Settings) - (Beep) - setting value, then press the REC/ENTER button. (All operation sounds are enabled) (Operation sounds are emitted for the following operations only) Power turned on Recording started Recording stopped Shutter pressed A disabled operation was selected or an error occurred Established Wi-Fi connection Power turned off (FDR-X3000/HDR-AS300) (All operation sounds are disabled)