Sony HDR FX1000 Operating Guide - Page 42

Changing the settings of your camcorder recordings (Continued) To name the picture profile settings You can name picture profile1 through 6. 1 Press the PICTURE PROFILE button B. 2 Select the picture profile that you want to name with the SEL/PUSH EXEC dial A. 3 Select [SETTING] t [PROFILE NAME] with the SEL/PUSH EXEC dial A. 4 Select a letter with the SEL/PUSH EXEC dial A. Repeat this operation until a complete name is entered. PICT. PROFILE P I CTURE PROF I LE CANCEL OK END z Tips • Each name can be up to 12 characters long. Characters that can be used in profile names: • A to Z • 0 to 9 5 Select [OK] with the SEL/PUSH EXEC dial A. The profile name is changed. 6 Select [ RETURN] t [OK] with the SEL/PUSH EXEC dial A. To copy the picture profile setting to other picture profiles 1 Press the PICTURE PROFILE button B. 2 Select the picture profile that you want to copy from with the SEL/PUSH EXEC dial A. 3 Select [SETTING] t [COPY] with SEL/PUSH EXEC dial A. 42 4 Select the number of the picture profile that you want to copy to with the SEL/ PUSH EXEC dial A. 5 Select [YES] with the SEL/PUSH EXEC dial A. 6 Select [ RETURN] t [OK] with the SEL/PUSH EXEC dial A. To reset the picture profile settings You can reset the picture profile settings by each picture profile number. You cannot reset all picture profile settings at once. 1 Press the PICTURE PROFILE button B. 2 Select the number of the picture profile that you want to reset with the SEL/ PUSH EXEC dial A. 3 Select [SETTING] t [RESET] t [YES] t [ RETURN] t [OK] with the SEL/PUSH EXEC dial A. Adjusting the volume You can adjust the volume of the stereo internal microphone or an external microphone connected to the MIC jack. AB C