Sony HDR FX1000 Operating Guide - Page 71
Dv Frame Rec, Shot Transition, Using The Menu, Trans Time, Trans Curve, Linear, Soft Stop
UPC - 027242754317
View all Sony HDR FX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
The operation of your camcorder differs depending on when you press the REC START/STOP button. If you press the button during [INTERVAL REC] recording, the recording temporarily stops. If you press it again, the [INTERVAL REC] recording restarts, If you press the button during [INTERVAL REC] interval, the [INTERVAL REC] recording stops and regular recording starts. If you press it again, regular recording stops. If you press the button once again, the [INTERVAL REC] recording restarts. To cancel the [INTERVAL REC] recording, select [ON/OFF] t [OFF] with the SEL/PUSH EXEC dial. b Notes • The recording time and interval time may differ slightly from the settings. • If you focus manually, you can get sharp images even if the lighting changes. • You can disable the beep during recording by setting [BEEP] to [OFF]. DV FRAME REC You can record stop motion (or frame-byframe) animation movies. That type of animation uses a technique of changing the subject, such as a doll or a toy's positions and recording it at each different position while your camcorder sits still. Use the Remote Commander to reduce camera shakes. B OFF Not use this function. ON ( ) Records a movie by stop motion (or frameby-frame) technique. 1 Select [ON] with the SEL/PUSH EXEC dial. 2 Press the MENU button to hide the menu screen. 3 Press the REC START/STOP button. Your camcorder records a movie for about 6 frames and returns to standby. 4 Move the subject and repeat step 3. b Notes • When you use frame recording continuously, the remaining tape time will not be indicated correctly. • The last scene will be longer than other scenes. • You cannot record index signals during frame recording. • This function is automatically set to [OFF] when you turn the power off and back on. SHOT TRANSITION You can set [TRANS TIME] and [TRANS CURVE]. See page 46 for details on using the shot transition function. x TRANS TIME You can set the transition time between [3.5 sec] and [90.0 sec]. The default setting is [4.0 sec]. x TRANS CURVE You can select the transition curve. The characteristics of the transition curves are illustrated in the following graphs. *1: parameter level *2: time LINEAR Make the transition linearly. *1 *2 B SOFT STOP Make the transition slowly at the end. *1 *2 Continued , 71 Using the Menu