Sony ILCE-7SM2 Help Guide Printable PDF - Page 103

[88] How to Use Using shooting functions Adjusting the focus Measuring the exact distance to the subject The mark shows the location of the image sensor*. When you measure the exact distance between the product and the subject, refer to the position of the horizontal line. The distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.). *The image sensor is the part that converts the light source to a digital signal. Note If the subject is closer than the minimum shooting distance of the lens, the focus cannot be confirmed. Make sure you put enough distance between the subject and the product. [89] How to Use Using shooting functions Adjusting the focus Priority Set in AF-S Sets whether to release the shutter even if the subject is not in focus when [Focus Mode] is set to [Single-shot AF] or [DMF] and the subject is remaining still. 1. MENU → (Custom Settings) → [Priority Set in AF-S] → desired setting. Menu item details AF: Prioritizes focusing. The shutter will not be released until the subject is in focus. Release: Prioritizes the shutter's release. The shutter will be released even if the subject is out of