Sony ILCE-7SM2 Help Guide Printable PDF - Page 198
Remote Ctrl, HDMI Resolution
View all Sony ILCE-7SM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
How to select how the time code is recorded (TC Make) 1. MENU → (Setup) → [TC/UB Settings] → [TC Make], then press of the control wheel. in the center Preset: Records the newly set time code on the recording medium. Regenerate: Reads the last time code for the previous recording from the recording medium and records the new time code consecutively from the last time code. The time code advances in [Rec Run] mode regardless of the [TC Run] setting. [214] How to Use Changing settings Setup menu Remote Ctrl You can shoot images using the RMT-DSLR1 or RMT-DSLR2 remote commanders (sold separately). Refer also to the operating instructions for the remote commander. 1. MENU → (Setup) → [Remote Ctrl] → desired setting. Menu item details On: Allows remote commander operation. Off: Does not allow remote commander operation. Note The RMT-DSLR1 remote commander cannot be used for movie recording. The lens or lens hood may block the remote sensor that receive the signals. Use the remote commander in the position from which the signal can reach the product. When [Remote Ctrl] is set to [On], the product does not switch to power save mode. Set [Remote Ctrl] to [Off] after using a remote commander. [215] How to Use Changing settings Setup menu HDMI Resolution