Sony ILCE-7SM2 Help Guide Printable PDF - Page 223
Access Point Set.
View all Sony ILCE-7SM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-Fi Protected Setup (WPS) button method. If the security setting is set to WEP or your access point does not support the Wi-Fi Protected Setup (WPS) button method, perform [Access Point Set.]. For details about the available functions and settings of your access point, see the access point operating instructions or contact the administrator of the access point. A connection may not be enabled depending on the surrounding conditions, such as the type of wall material or if there is an obstruction or poor wireless signal between the product and access point. If that happens, change the location of the product or move the product closer to the access point. [251] How to Use Using Wi-Fi functions Changing the settings of Wi-Fi functions Access Point Set. You can register your access point manually. Before starting the procedure, check the SSID name of the access point, security system, and password. The password may be preset in some devices. For details, see the access point operating instructions, or consult the access point administrator. 1. MENU → (Wireless) → [Access Point Set.]. 2. Select the access point you want to register. When the desired access point is displayed on the screen: Select the desired access point. When the desired access point is not displayed on the screen: Select [Manual Setting] and set the access point. *For the input method, refer to "How to use the keyboard." If you select [Manual Setting], input the SSID name of the access point, then select the security system. 3. Input the password, and select [OK].