Sony ILCE-7SM2 Help Guide Printable PDF - Page 41
Supplying power from a wall outlet wall socket
View all Sony ILCE-7SM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
The battery pack is used at an ambient temperature of 25°C (77°F). Using the lens FE 28-70mm F3.5-5.6 OSS (sold separately) Using Sony Memory Stick PRO Duo (Mark2) media (sold separately) [Viewfinder Bright.]: [Manual][±0] [Monitor Brightness]: [Manual][±0] [Display Quality]: [High] The number for "Shooting (still images)" is based on the CIPA standard, and is for shooting under the following conditions (CIPA: Camera & Imaging Products Association): DISP: [Display All Info.] Focus Mode: AF-S One picture is taken every 30 seconds. The power is turned on and off once every ten times. The number of minutes for movie shooting is based on the CIPA standard, and is for shooting under the following conditions: The image quality is set to 60i 17M (FH) . Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting stand-by, turning on/off, etc. Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has been reached, and then continued by pressing the MOVIE (Movie) button again. Other functions, such as zooming, are not used. If the remaining battery is not displayed, press the DISP (Display Setting). [17] How to Use Preparing the camera Charging the battery pack Supplying power from a wall outlet (wall socket) By using the supplied AC adaptor, you can shoot and playback images while the power is supplied from a wall outlet (wall socket) without using up the battery power. 1. Insert the battery pack into the camera. 2. Connect the camera to the wall outlet (wall socket) with a micro USB cable (supplied) and an AC adaptor (supplied). Note The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera. If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon ( ) is displayed on the monitor. Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If you remove the battery pack, the camera will be turned off.